Effect of packaging materials and storage temperature on the quality of sour cherry nectar

The purpose of this research was to determine the effects of the packaging materials and size on the stability of monomeric anthocyanins, polyphenols, antioxidant activity, ascorbic acid, colour index and hydroxyl methyl furfural (HMF) during the 12‐month shelf life of sour cherry nectars at 4 °C and 20 °C. Sour cherry nectars were aseptically filled out into packaging of different sizes and materials. The packaging included cartons of two different sizes (200 and 1000 mL) and aluminium cans (330 mL). Results showed that the nectars were of better quality when stored at lower temperatures. HMF generally increased significantly for all nectars during storage. Conversely, the total polyphenol content and the antioxidant activity of the nectars stored in aluminium cans and the larger‐sized carton packaging decreased during storage. Lower anthocyanin loss and colour change were found in the nectars stored in aluminium cans. However, the better packaging material was found to be the large‐sized carton package when HMF was analysed.     

Conducting carbon/polymer composites as a catalyst support for proton exchange membrane fuel cells

Carbon/poly(3,4‐ethylene dioxythiophene) (C/PEDOT) composites are synthesized by in situ chemical oxidative polymerization of EDOT monomer on carbon black in order to decrease carbon corrosion that occurred in carbon‐supported catalysts used in proton exchange membrane fuel cell. The effects of different dopants including polystyrene sulfonic acid, p‐toluenesulfonic acid and camphorsulfonic acid with the addition of ethylene glycol or dimethyl sulfoxide on the properties of the composites are investigated. The synthesized composites are characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, surface area analysis and scanning electron microscope. Electrical conductivity is determined by using the four‐point probe technique. Electrochemical oxidation characteristics of the synthesized C/PEDOT composites are investigated by cyclic voltammetry by applying 1.2 V for 24 h. The composite prepared at 25 °C with p‐toluenesulfonic acid and ethylene glycol shows the best carbon corrosion resistance. Platinum‐supported catalyst by using this composite was prepared using microwave irradiation technique, and it was seen that the prepared catalyst did not significantly lose its hydrogen oxidation and oxygen reduction reaction activities after electrochemical oxidation. Copyright © 2013 John Wiley & Sons, Ltd.     

Seismic,ground motion and geotechnical characteristics of the 2011 Van-Erciş and Van-Edremit earthquakes of Turkey,and assessment of geotechnical damages

Two devastating earthquakes with moment magnitudes of 7.2 and 5.6 occurred on October 23, 2011 (Van-Erci? earthquake) and November 9, 2011 (Van-Edremit earthquake), respectively, in the Van Province of the eastern Turkey. The Van-Erci? and Van-Edremit earthquakes caused 604 and 38 fatalities, respectively, and heavy damage to buildings and other structures, particularly in Erci? town and Van City. In this study, characteristics of both main shocks and their geotechnical aspects, such as local site conditions, liquefaction phenomena and associated ground deformations and slope failures are evaluated. The failures of slopes and embankments and rock falls and ground liquefaction may also be indications of diluted ground deformation caused by the earthquake fault. It seems that a wedge-like body bounded by two fault planes was uplifted. As a result of this movement, the northern shoreline of Van Lake uplifted. The November 9, 2011 Van-Edremit earthquake was triggered due to the variation of crustal stresses induced by the October 23, 2011 earthquake. The effects of local site conditions have contributed to the damage of some parts of Erci? city and its vicinity; however, the ground liquefaction was not observed in the city as anticipated. With a magnitude of 5.6, the Van-Edremit earthquake is probably the smallest magnitude earthquake to cause liquefaction in Turkey so far.     

CVD diamond layers for electrochemistry

Diamond electrodes of different morphologies and qualities were manufactured by hot filament chemical deposition (HF CVD) techniques by changing the parameters of diamond growth process. The estimation of diamond quality and identification of different carbon phases was performed by Raman spectroscopy measurements. The effect of diamond quality and amorphous carbon phase content on the electrochemical response of an obtained diamond electrode in 0.5 M H₂SO₄ as supporting electrolyte was investigated by cyclic voltammetry with [Fe(CN)₆]^4?/3? as a redox probe. The kinetic parameters such as catalytic reaction rate constant k₀ and electron transfer coefficient α were determined. The obtained results show that the analytical performance of undoped diamond electrodes can be implemented just by the change of diamond layers quality.     

Investigation of hybrid‐capacitor properties of ruthenium complexes

Ru complexes were successfully produced, and their structural properties were investigated using FTIR, Raman, and single crystal XRD patterns. The HOMO, LUMO, Eg, and electronic surface potential (ESP) values of the molecules were calculated by a Gaussian program. The complexes were used for producing hybrid capacitor cells as electrode materials. According to electrochemical analysis, complex 2 showed the best CV graph between ?1 V and +1 V and had the highest current value and hysteresis area when compared with the other complexes. The performance analysis and the capacity fade of the cells were investigated. The first capacity values of the complexes were 57.5, 22.1, 16.9, and 0.0021 F/g for complexes 1 , 2 , 3 , and 4 , respectively. The capacitive mechanism of the cells as relates to molecular interactions was also investigated. We suggested that the ESP values of the molecules were directly related to the capacitive performance of the cells. In addition to this, the best cycling performance was obtained for complex 2, which has the lowest Eg value among the complexes. We speculate that the charged regions on the complex materials have a crucial role in the increasing the capacitance of the cells.     

Biochemical characterization of a semi-purified aspartic protease from sea catfish Bagre panamensis with milk-clotting activity

Food Science and Biotechnology - Pepsin from stomach of Bagre panamensis was semi-purified and biochemically characterized. The acid proteolytic activity and purification fold were...